Hydrophilic Polyethersulfone (PES) Membrane Cartridge
Electronics Grade PES Cartridges are designed to meet the special needs of the electronics and high purity chemical industries. These membrane cartridges are resistant to most acids and bases and are compatible with most sanitizing agents. This series delivers high flowrates at low pressure drops; making it an excellent choice for Ultra-Pure water systems. Each cartridge is flushed to 18 MΩ with UPW and 100% integrity tested to deliver ultra-clean effluent as well as ultra-low extractables. The Extended Area option (GGPESX) offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading capacity in the same footprint.
Feature
Specifications
Dimensions (Nominal) :
Outside Diameter : 2.7” (70 mm) Nominal Lengths : 10 to 40 inches (25.4 to 101.6 cm) Nominal Materials of Construction
Membrane : Polyethersulfone
Support Media : Polypropylene End Caps : Polypropylene Center Core : Polypropylene Outer Support Cage : Polypropylene Gaskets / O-Rings : Buna, EPDM, Silicone, Viton, Teflon Encapsulated Viton |
Application
Micron Rating (μm)0.04, 0.1, 0.2, 0.45, 0.65, 0.8 μm
Sanitization/Sterilization
Filtered Hot Water : 80°C for 30 min.
Steam Sterilization : 121°C for 30 min., multiple cycles |
|