Electronics Grade - Nylon Pleated Filter Cartridge
Electronics Grade Nylon 6,6 Cartridges are designed to meet the special needs of the electronics and high purity chemical industries. These cartridges are available in both standard and Plus+ grades. The Plus+ grade membrane is modified with a highly positive charge; allowing for the removal of particles that are significantly smaller than the membrane’s rating. Each cartridge is flushed to 18 MΩ with UPW and 100% integrity tested to deliver ultra-clean effluent as well as ultra-low extractables. The Extended Area option offers up to 40% more surface area. This additional area results in significant increases in flowrate and loading-capacity in the same footprint.
Feature
Specifications
Dimensions (Nominal) :
Outside Diameter : 2.7” (70 mm) Nominal Lengths : 10 to 40 inches (25.4 to 101.6 cm) Nominal Materials of Construction
Membrane : Nylon 6,6
Support Media : Polypropylene End Caps : Polypropylene Center Core : Polypropylene Outer Support Cage : Polypropylene Gaskets / O-Rings : Buna, EPDM, Silicone, Viton, Teflon Encapsulated Viton |
Application
Micron Rating (μm)0.03, 0.05, 0.1, 0.2, 0.45, 0.65, 0.8, 1.2 μm
Sanitization/SterilizationFiltered Hot Water : 80°C for 30 min.
Steam Sterilization : 121°C for 30 min., multiple cycles |
|